| Manufacturer: | Bandit | Bandit | Carlton |
| Configuration: | Model 280XP | Model 280HD | 2018 |
| Measurements | |||
| Capacity: | 18″ diameter | 18″ diameter | 18″ diameter |
| Throat Opening: | 18″ wide x 20.5″ tall | 18″ wide x 20.5″ tall | 20.5″ wide x 18.5″ tall |
| Feed Rate (FPM): | 100 FPM | 100 FPM | 100 FPM |
| Dimensions | |||
| Length (tray open): | 18′ 8″ | 21′ | 20′ |
| Width: | 7′ 4″ | 7′ 4″ | – |
| Height: | 9′ 6″ | 9′ 6″ | 9′ |
| Weight: | 9,500 – 10,500 lbs. | 12,500 lbs. | 11,700 lbs. |
| Engine | |||
| Horsepower Range: | 139 – 174 HP | 200 – 225 HP | John Deere 170 HP |
| Chassis | |||
| Frame: | 2″ x 6″ | 2″ x 6″ | 3″ x 8″ |
| Suspension: | (1) 12,000 lb. Axle | (1) 14,000 lb. Axle | – |
| Fenders: | Steel, .1875″ Gauge | Steel, 12-Gauge | .1875″ Checker Plate |
| Hitch: | 2.5″ Pintle | 2.5″ Pintle | 9″ Pintle |
| Axle/Undercarriage: | (1) 12,000 lb. Axle | (1) 12,000 lb. Axle | (2) 9,000 lb. Axle |
| Tires/Tracks: | (2) 235/75R 17.5 Tires | (2) 235/75R 17.5″ Tires | (4) 235/75R 17.5″ Tires |
| Tongue Jack: | 8,000 lbs. | 8,000 lbs. | 10,000 lbs. |
| Feed System | |||
| Type: | Slide Box | Slide Box | – |
| Down Pressure Springs: | (2) 21″ Adjustable Springs | (2) 21″ Adjustable Springs | 19″ Tight Wound |
| Feed Wheels: | (2) Horizontal 10.625″ diameter | (2) Horizontal 10.625″ diameter | 15.75″ diameter |
| Number of Hydraulic Motors: | 2 | 2 | – |
| Displacement (CID): | 63.9 | 63.9 | 64 |
| Infeed Hopper Dimensions: | 33.5″ high x 64″ wide | 33.25″ high x 64″ wide | – |
| Bottom Clean Out Door: | Standard | Standard | – |
| Cutting System | |||
| Style: | Disc | Disc | Disc |
| Disc/Drum Dimensions: | 55″ diameter x 2″ thick | 55″ diameter x 2″ thick | 55″ diameter x 2″ thick |
| RPM: | 850 | 850 | 900 |
| Knife Pockets: | 2 | 2 | 6 |
| Knives (thickness x width x length): | (2) .5″ thick x 4.5″ wide x 7.25″ long, (1) .5″ thick x 4.5″ wide x 5.125″ long | (2) .5″ thick x 4.5″ wide x 7.25″ long, (1) .5″ thick x 4.5″ wide x 5.125″ long | (4) 7.25″ x 4.5″ x .5″ thick, (2) 5.125″ |
| Chipper Shaft Diameter: | 5″ | 5″ | 5″ |
| Bearings: | (2) 2.9375″ | (2) 2.9375″ | 2.4375″ |
| Discharge | |||
| Swivel: | 360º | 360º | Hydraulic Adjustable |
| Deflector: | 3 Position / Manual | 3 Position / Manual | – |
| Tanks | |||
| Fuel Tank Capacity: | 30 Gallon | 60 Gallon | 62 Gallon |
| Hydraulic Tank Capacity: | 32 Gallon | 32 Gallon | 20 Gallon |
